Okay, so there’s been a lot of talk about Qsat challenges ranging from stability and reliability during live matches, to number of channels available for viewing. Sometimes, cheap things bring us more stress. However, since the options for access to good tv programming in Africa remain few, the chinese technology opportunists will keep serving what the majority can afford.

The fact is, eventhough many know the reliability issues Qsat is saddled with, they still ignore CCcam and Oscam servers for avatarcam codes. Maybe the world of satellite technology enthusiasts and tv viewers is gradually but steadily waking up to the present recognition of the fact that a blend of the two is perhaps the only way to sustain a beautiful viewing experience in this present times.

So to get the whole package : Reliability, Stability and Complete Channel List, you have decided to get a cccam account to use on your Qsat. The intention here then is to show you how to enable cccam capability on your Qsat decoder, to give you access to all the benefits cccam users enjoy watching tv via dreambox, strong and openbox decoders.

Here’s what to do to access CCcam protocol on your Qsat :》

1. Press MENU On Your Remote.

2. Select SETTING

3. Navigate to XCAM SETUP ( Last Item On That Page. Can Be Found Just After SYSTEM)( If you dont find Xcam setup on this page, dont fret. The service is simply not active, and that’s not a problem . You can activate xcam by simply pressing 1512 Whiles on the SETTING page. Xcam menu will pop up).

After selecting Xcam in the previous step, the next page should present you with four items PATCH, SHARING, AVATARCAMHD and DQCAM. Now let’s move to the next step.

4. Select SHARING This where you are going to input information from your purchased CCCam account. Take note of what I’m going to say next. When you navigate to SERVER, PORT, USER and PORT, you have to press the RIGHT NAVIGATION BUTTON to bring up the onscreen keyboard for you to type in values. Also, After typing the correct values in each of the following sections, You MUST PRESS THE BLUE BUTTON on your remote to save what you typed, else you lose everything. While the onscreen keyboard is on, you can type special characters by PRESSING THE RED BUTTON on your remote control.

5. First Item is the SERVER NUMBER. Since this is your first cccam account, leave this at 1.

6. Then you have ACTIVE. This should be turned to ON.

7. Next item is PROTOCOL. Select CCCAM for the protocol.

8. Next you have SERVER. Here, type in server address/IP/url provided in your purchased account. E.g (sky9.dyndns.cx / 201.135.222.222 / http:// **********

9. Now you have PORT. This is the relay network port of your server address. This should be a five digit number

10.Next Item is USER. Here input the username/UserID/LoginID provided In your account.

11.Now you have PASSWORD. Also provided by account supplier.

12. The last items include DESKEY and STATUS. Deskey is needful when protocol is MGcam or NewCam. Now You have entered all your values correctly. To connect the cccam, simply press the BLUE BUTTON on your remote control.

Before doing this however, you should have deactivated avatarcam, the inbuilt protocol Qsat uses to grant access to scrambled channels. To do this, simply move back one page from where you are, by pressing EXIT/BACK. Now select PATCH, and turn AVATARCAMHD from ON to OFF. When this is done, you can return to SHARING and connect your cccam.

Now, if your internet connection is ok, your purchased cccam is valid, and your input has been correctly done, the STATUS should indicate CONNECTED, which indicates you are good to go with viewing.

Using GPRS for CCCAM might not be the best, as you might not enjoy the kind of data packet flow that would keep your cccam working without breaks. I suggest you use a 3G/3.5G/3.75G/4G USB stick instead of a gprs direct simcard connection. Once slotted at the back or front of your box, Navigate to MENU>>> SETTING>>> ETHERNET CONFIG>>> 3G.
APN is usually Internet for most Service Providers, Dialcode is *99#. Save your settings and you would have an amazingly stable cccam viewing experience that you would relish. You can also use LAN CONNECTION if you have a wired fixed broadband internet. I Hope this article has provided you with enough information and you some help.

Should you need a stable, reliable and affordable CCcam Account as a reseller or End User, leave your comment here and I’ll contact you via your email so we can discuss. TV1 and Aone available.

Happy Christmas and a Fantastic New Year of New Technologies